The new RackLift model 600RS server lifter replaces our RL600S with an innovative design capable of lifting devices weighing up to 650 pounds, 295 kg.
Rackmount devices are getting heavier and deeper. Now data centers need a server lift able to carry an oversized load, centered on the lift table. This is what the 600RS does.
Thanks to the open-back design, larger and longer servers can now be loaded in from the front or backside of the unit. This innovation allows you to keep expensive equipment centered and balanced during transport. The 600RS uses a side balanced, double-cabled lift basket. It is ideally suited for lifting many of the new servers that house all the hard drives on one side causing weight/balance issues.
For Sales Enquiry:
KnitLogix
The RL3000 is a manual lift designed to lift and move an entire, fully loaded cabinet.
With this server rack mover one technician can lift and move a fully loaded server cabinet from one location to another.
By moving an entire loaded cabinet, your data center will save time that is normally wasted disassembling and reassembling cabinets for relocation.
A variety of different racks, empty or fully populated, can be lifted and moved using the RL3000. The RL3000 can also be used to raise cabinets temporarily to access the floor below and to lift cabinets from a pallet.
This is the ideal rack mount lift tool for your data center because now a single operator can relocate data center cabinets easily and safely.
For Sales Enquiry:
KnitLogix
The RL600C is a manual server lift built to your height specifications. It is used to safely, easily and efficiently lift up to 650 pounds in a “container data center” or “POD” with low doorways. It can also be made with extra height to reach taller cabinets found in some data centers.
The tray table extends 24 inches into the rack space for easy and complete insertion of equipment.
For Sales Enquiry:
KnitLogix
The RackLift RL400 is our entry level server lift. It is a manual server lifter suitable for data centers lifting below 600 pounds/ 272 kg.
Without RackLift, heavy servers are laboriously stripped of power supplies, fans and modules for lifting manually. Once installed, all those components are reinserted. This time-consuming, labor-intensive task can be avoided with a single technician installing a fully assembled device, safely and easily.
The RL400 enables you to install devices in tight spaces and containment aisles. This data center lift can be operated easily by anyone with average physical strength, thanks to the high ratio gearing winch.
Safety is a priority. When the user releases the handle, the winch brake automatically engages. Wheel brakes and included safety straps add to the stability during lifting. The tray table extends 24 inches/ 61 cm into the rack space. Maneuverability is a breeze as the RL400 rotates 360° in a two-tile aisle.
For Sales Enquiry:
KnitLogix
High density inventory management system in a medium security vending machine format. Manage batteries, flash lights, safety supplies, cutting tools and fasteners with the push of a button.
For Sales Enquiry:
KnitLogix
Increase the security and accuracy of your unattended tool crib with a RFID portal that will provide complete inventory control.
| THE BASICS | |
|---|---|
| MATERIALS/FINISH | Sturdy steel construction and powder coated |
| CONFIGURATIONS | 85″w x 52″d (67″d with doors open) x 95″h |
| WEIGHT CAPACITY | NA |
| TOUCHSCREEN SIZE | 19″ |
| ENCLOSURE DIMENSIONS | • Enclosure: 85”W (215cm) x 95”H (241cm) x 51”D (129cm) (closed) / 68”D (172cm) (open) |
| POWER | • 100-240VAC– 50/60HZ, 5A/2.5A MAX |
| WARRANTY | 12-month warranty |
For Sales Enquiry:
KnitLogix
The first vertical lift module that has the capability and user friendliness to be called a vending machine.
| THE BASICS | |
|---|---|
| MATERIALS/FINISH | Sturdy steel construction and powder coated |
| CONFIGURATIONS | Machine Height 12′-6″ to 40′ in 6″ increments |
| WEIGHT CAPACITY | Load Capacity 460 lbs per tray |
| TOUCHSCREEN SIZE | 19″ |
| ENCLOSURE DIMENSIONS | Machine Footprint 69″ X 99″ |
| POWER | Incoming Power Requirement 208-240 VAC, 3 Phase, 60 HZ, 20 Amp Service Required |
| WARRANTY | 12-month warranty |
For Sales Enquiry:
KnitLogix
The last mile in your supply chain management system. The Robocrib® VX500 is a robotic inventory tracking system for cutting tools, fasteners, shop supplies and PPE
| THE BASICS | |
|---|---|
| MATERIALS/FINISH | Sturdy steel construction and powder coated |
| CONFIGURATIONS | Up to 628 Bins SKUs (Unique Products) |
| WEIGHT CAPACITY | 720 lbs (272kg) |
| TOUCHSCREEN SIZE | 19″ |
| ENCLOSURE DIMENSIONS | 34”W (86cm) x 76”H (193cm) x 39”D (99cm) |
| POWER | 100-240VAC– 50/60HZ, 5A/2.5A MAX |
| WARRANTY | 12-month warranty |
For Sales Enquiry:
KnitLogix
The most popular industrial dispensing machine in the industry backed by the most powerful tool crib software available.
| THE BASICS | |
|---|---|
| MATERIALS/FINISH | Sturdy steel construction and powder coated |
| CONFIGURATIONS | Up to 1048 Bins SKUs (Unique Products) |
| WEIGHT CAPACITY | 1100 lbs (453kg) |
| TOUCHSCREEN SIZE | 19″ |
| ENCLOSURE DIMENSIONS | 34”W (86cm) x 76”H (193cm) x 39”D (99cm) |
| POWER | 100-240VAC– 50/60HZ, 5A/2.5A MAX |
| WARRANTY | 12-month warranty |
For Sales Enquiry:
KnitLogix
A powerful inventory management tool in a flexible vending machine format for dispensing everything from tools and safety supplies to boxes.
THE BASICS
For Sales Enquiry:
KnitLogix
A complete stock management and inventory control system, packaged in an automated dispensing machine, with the capacity to hold over 2500 SKUs.
| THE BASICS | |
|---|---|
| MATERIALS/FINISH | Sturdy steel construction and powder coated |
| CONFIGURATIONS | Up to 2574 Bins SKUs (Unique Products) |
| WEIGHT CAPACITY | 2500 lbs (1179kg) |
| TOUCHSCREEN SIZE | 19″ |
| ENCLOSURE DIMENSIONS | 62”W (157cm) x 84”H (213cm) x 62”D (157cm) |
| POWER | 100-240VAC– 50/60HZ, 5A/2.5A MAX |
| WARRANTY | 12-month warranty |
For Sales Enquiry:
KnitLogix
A customizable asset tracking locker system for items such as laptops, iPads, power tools, gauges or any asset that needs to be tracked. Available with or without recharging capabilities.
| THE BASICS | |
|---|---|
| MATERIALS/FINISH | Sturdy steel construction and powder coated |
| CONFIGURATIONS | Completely modular |
| WEIGHT CAPACITY | 40 lbs. – 200 lbs. per module |
| TOUCHSCREEN SIZE | 19″ |
| ENCLOSURE DIMENSIONS | 27.75″W x 75″H x 25.5″D |
| POWER | 100-240VAC– 50/60HZ, 15A/7.5A MAX |
| WARRANTY | 12 Month Warranty |
tags: point of use, locker, high security, field configurable/reconfigurable, check in/out, asset
For Sales Enquiry:
KnitLogix
Are you always focused on privacy, like HIPAA or FACTA or information management like SOX? ECM systems have the controls you need and deliver reports that make audits a breeze.
Replace paper forms with electronic forms to capture information and share it across the enterprise digitally.
Take control of information across the enterprise by restricting access to folders, documents, electronic files, fields, annotations, and other granular document properties.
The steps of a business process can be easily represented diagrammatically and automatically route documents to the right people at the right time.
What happens when teams have access to the information they need? They work together better and more work gets completed. Built-in collaboration tools let people edit, update, and approve versions as they go, no more exchanging emails and waiting for approvals.
Instantly find documents by identifying specific words or phrases within their text, metadata, annotations, and entry names.
Easily store business-critical documents in a digital repository, and instantly view or make edits to them.
The process of importing all your information into a digital repository.
